Differences

This shows you the differences between two versions of the page.

--- project:maerklin:system_control:start [2025/08/27 19:03] – [Technical Details] Peter Siegmund
+++ project:maerklin:system_control:start [2025/09/23 17:05] (current) – [Hardware] Peter Siegmund
@@ Line 12: / Line 12: @@
 This system is built to be highly extensible. For this purpose, I designed a wireless system for indoor use based on Bluetooth LE. This decision was primarily driven by two factors: firstly, my desire to gain experience with BLE in a new project, and secondly (and more importantly), the aim to ensure independence from any specific MCU.
-Currently, I'm using an ESP32, which supports both Wi-Fi and BLE. However, I also plan to test other microcontrollers, such as those from the STM32 family (for instance, the [[https://www.st.com/en/microcontrollers-microprocessors/stm32wb-series.html|STM32WB-Series]], which offers strong BLE capabilities), to maintain this flexibility.
+Currently, I'm using an [[hardware:esp32:start|ESP32]], which supports both Wi-Fi and BLE. However, I also plan to test other microcontrollers, such as those from the [[hardware:stm32:start|STM32]] family (for instance, the [[https://www.st.com/en/microcontrollers-microprocessors/stm32wb-series.html|STM32WB-Series]], which offers strong BLE capabilities), to maintain this flexibility.
 ===== Technical Details =====
@@ Line 39: / Line 39: @@
 ==== Hardware ====
-The hardware part was created within KiCad and it will be also in the git repository.
+The hardware part was created within [[software:kicad:start|]] and it will be also in the git repository.
 The schematics is very simple.
-{{ :project:maerklin:system_control:system_control_schematic.png?600 |}}
+{{ :project:maerklin:system_control:maerklin_system_control.svg?600 |}}
-These are the latest PCBs, which I created. The manufacturing is done by [[http://jlcpcb.com|JLCPCB]], but it's an empty PCB, so I need to add the components to it later.
+These are the latest PCBs, which I created. The manufacturing is done by the sponsor [[https://pcbway.com|PCBWay]], but it's an empty PCB, so I need to add the components to it later.
 {{:project:maerklin:system_control:pcb_front.png?330 |}}