Differences

This shows you the differences between two versions of the page.

--- project:maerklin:warnemuende:lighthouse:start [2025/06/12 21:48] – [EDA/ECAD] Peter Siegmund
+++ project:maerklin:warnemuende:lighthouse:start [2025/07/15 21:35] (current) – [KiCad] Peter Siegmund
@@ Line 8: / Line 8: @@
 Since Warnemünde has two [[https://de.wikipedia.org/wiki/Molenfeuer_Warnem%C3%BCnde|Mole Beacons]] (one green and one red), I decided to recreate the green beacon light. I did some research and found some good reference images for this project.
+===== Source Code =====
+[[https://github.com/mars3142/warnemuende_lighthouses|Github]] Action: {{https://github.com/mars3142/warnemuende_lighthouses/actions/workflows/esp32_build.yaml/badge.svg?nocache&.png}}
 ===== Design =====
@@ Line 19: / Line 23: @@
 A more challenging part will be the outdoor lights, as the building has two of them. I will try to use 0402 3V LEDs and hope that I can print a miniature enclosure to mimic the real lamps.
-==== MCAD ====
+===== KiCad =====
-The modell was created in [[software:onshape:start|]]. More about that later.
+The custom PCBs are created within [[software:kicad:start|]].
-==== EDA/ECAD ====
+This is the LED board, with is located a the top within the building. Is has connections to the WS2812B RGB LED and the two outdoor 0402 LEDs, which are within separate housings.
-The two PCBs are created within [[software:kicad:start|]].
-This is the LED board, with is located a the top within the building. Is has connections to the WS2812B RGB LED and the three outdoor 0402 LEDs, which are within separate housings.
 {{:project:maerklin:warnemuende:lighthouse:light_board_front.png?300|}}
 {{:project:maerklin:warnemuende:lighthouse:light_board_back.png?300|}}
 {{:project:maerklin:warnemuende:lighthouse:light_board_schematics.png?600|}}
-===== Source Code =====
-[[https://github.com/mars3142/warnemuende_lighthouses|Github]] Action: {{https://github.com/mars3142/warnemuende_lighthouses/actions/workflows/esp32_build.yaml/badge.svg?nocache&.png}}
+But the LED board can't work without any controller. Here it is.
+{{:project:maerklin:warnemuende:lighthouse:mcu_board_front.png?300|}}
+{{:project:maerklin:warnemuende:lighthouse:mcu_board_back.png?300|}}
+{{:project:maerklin:warnemuende:lighthouse:mcu_board_schematics.png?600|}}