Differences

This shows you the differences between two versions of the page.

--- project:nanoleaf_clone:start [2025/04/27 07:49] – Peter Siegmund
+++ project:nanoleaf_clone:start [2025/05/30 10:40] (current) – [Basics] Peter Siegmund
@@ Line 1: / Line 1: @@
 ====== Nanoleaf Shapes (202x) ======
-===== Grundlegendes =====
+===== Basics =====
-Viele Youtuber / Influencer haben an den Wänden originale [[https://nanoleaf.me/de-DE/products/nanoleaf-elements/?category=elements|Nanoleaf Elements]]. Die sehen richtig cool aus, aber für manchen reicht auch eine billige Kopie.
-Daher war jetzt der Gedanke einfach die Panels selber zu drucken und dann [[https://kno.wled.ge/|WLED Project]] als Grundlage zu benutzen. Die Hardware dafür ist preiswert und mit einem guten Modell kann man sicher auch schönes Panels drucken.
+Many YouTubers and influencers feature original [[https://nanoleaf.me/de-DE/products/nanoleaf-shapes/?category=triangles|Nanoleaf Triangles]] on their walls. While they offer a striking visual, a more affordable alternative is perfectly adequate for some.
+This sparked the idea of simply 3D printing the panels yourself and then utilizing the [[https://kno.wled.ge/|WLED Project]] as the foundation. The necessary hardware is inexpensive, and with a good 3D model, you can certainly create some very attractive panels.
 ===== Hardware =====
-  - ESP32 (egal welches Modell)
-  - WS2812B LED Stripes
-  - Netzteil
-Da die verfügbaren Shapes alle irgendeine Einschränkung haben, werde ich wohl in [[https://cad.onshape.com/documents/631fada1f2102df38ec92615/w/0bf10fa788be7bb3f5e981ed/e/f3fc9fe9e2596355fd80daa2?renderMode=0&uiState=643d5db25dc4f40dfefb2ca3|OnShape]] (oder OpenSCAD) meine eigenen Shapes anhand von Nanoleaf Fotos nachbauen. Dafür wird sich außerdem die Teileliste vergrößern.
+Here's what you'll need:
-  - Diffusor Folie
+  * [[hardware:esp32:start|]] (any model)
+  * [[hardware:ws2812b:start|]] LED strips
+  *Power supply
-Ein Kumpel machte jetzt noch der Vorschlag, dass man Pogo Stecker als Verbinder einsetzen soll. Das klingt gut, aber macht die interne Schaltung komplexer, weil ich bisher nicht weiß, wie ich dann die WLEDs verkabeln muss.
+Since the available shapes all have certain limitations, I'll likely design my own versions in [[https://cad.onshape.com/documents/631fada1f2102df38ec92615/w/0bf10fa788be7bb3f5e981ed/e/f3fc9fe9e2596355fd80daa2?renderMode=0&uiState=643d5db25dc4f40dfefb2ca3|OnShape]] (or OpenSCAD), based on Nanoleaf photos.
-===== Optionales =====
+This means the parts list will also expand to include:
-Theoretisch könnte man auch ein Mikrophone ans den ESP32 anschließen und dann “sound reactive” die LEDs betreiben, wobei es in meinem (Arbeits-)Zimmer meist ruhig ist und nur die Tastatur zu hören ist. Und zu Video-Calls ist es nie so dunkel (zumindest nicht im Frühling/Sommer).
-===== Sourcecode =====
+  * Diffuser sheet
+A friend also suggested using pogo pins as connectors. While that sounds like a promising idea, it would make the internal circuitry more complex, as I'm not yet sure how the WLEDs would need to be wired in that configuration.
+===== Optional =====
+Theoretically, you could also connect a microphone to the ESP32 to enable a "sound reactive" mode for the LEDs. However, my workroom is usually quite quiet, with the main sound typically just being my keyboard. Additionally, during video calls, it rarely gets dark enough for such an effect to be particularly noticeable, especially during spring and summer.
+===== Source Code =====
 https://github.com/Aircoookie/WLED
-===== Inspirationen =====
+===== Inspirations =====
-  - https://cults3d.com/de/modell-3d/haus/light-panels-nanoleaf-replica-wall-panel
-  - https://cults3d.com/de/modell-3d/haus/lampara-triangular-simil-nanoleaf
-===== echter Nanoleaf =====
+https://cults3d.com/de/modell-3d/haus/light-panels-nanoleaf-replica-wall-panel
-{{ :project:nanoleaf_clone:nanoleaf_triangle_front.png?400|Nanoleaf Triangle Front}}
+https://cults3d.com/de/modell-3d/haus/lampara-triangular-simil-nanoleaf
-{{ :project:nanoleaf_clone:nanoleaf_triangle_back.png?400|Nanoleaf Triangle Back}}
+===== Actual Nanoleaf =====
+{{ :project:nanoleaf_clone:nanoleaf_triangle_front.png?400 |Nanoleaf Triangle Front}}
+{{ :project:nanoleaf_clone:nanoleaf_triangle_back.png?400 |Nanoleaf Triangle Back}}
-  - Kantenlänge: 113 mm
+  * Edge length: 113 mm
-  - Deckfolie 0.5 mm
+  * Cover film: 0.5 mm
-  - minimale Höhe: 6 mm
+  * Minimum height: 6 mm
-  - maximale Höhe: 10 mm
+  * Maximum height: 10 mm
-  - Rundungslänge (Rand): 20 mm
+  * Rounding length (Edge): 20 mm
-  - Rundungslänge (Scheitel): 14 mm
+  * Rounding length (Vertex): 14 mm
-  - Wandstärke: 2 mm
+  * Wall thickness: 2 mm
-  - Margin (Rückseite): 3 mm (2 mm bei Anschlüssen)
+  * Margin (Rear side): 3 mm (2 mm at connectors)
-Link zum technischen Teardown: https://www.eevblog.com/forum/projects/nanoleaf-aurora-teardown/
+Link to the technical teardown: https://www.eevblog.com/forum/projects/nanoleaf-aurora-teardown/
-===== WIP (Design im OnShape) =====
+===== WIP (Design in OnShape) =====
-{{:project:nanoleaf_clone:2023-05-16.png?400 |2023/05/16}}
+{{ :project:nanoleaf_clone:2023-05-16.png?400 |2023/05/16}}
-{{:project:nanoleaf_clone:2023-06-02_body.png?400 |2023/06/02 Body}}
+{{ :project:nanoleaf_clone:2023-06-02_body.png?400 |2023/06/02 Body}}
-{{:project:nanoleaf_clone:2023-06-02_cover.png?400 |2023/06/02 Cover}}
+{{ :project:nanoleaf_clone:2023-06-02_cover.png?400 |2023/06/02 Cover}}
-===== WIP (Testprints) =====
+===== WIP (Test Prints) =====
-{{:project:nanoleaf_clone:2023-06-01_testprint_1.png?400 |2023/06/01 Print separated}}
+{{ :project:nanoleaf_clone:2023-06-01_testprint_1.png?400 |2023/06/01 Print separated}}
-{{:project:nanoleaf_clone:2023-06-01_testprint_2.png?400 |2023/06/01 Print assembled}}
+{{ :project:nanoleaf_clone:2023-06-01_testprint_2.png?400 |2023/06/01 Print assembled}}