Many YouTubers / Influencers have original Nanoleaf Elements on their walls. They look really cool, but for some, a cheap copy is sufficient.

Therefore, the idea was to simply 3D print the panels yourself and then use the WLED Project as a basis. The hardware for this is inexpensive, and with a good model, you can surely print nice panels too.

• ESP32 (any model)
• WS2812B LED Stripes
• Power supply

Since the available shapes all have some limitation, I will probably recreate my own shapes in OnShape (or OpenSCAD) based on Nanoleaf photos. For this, the parts list will also grow.

• Diffuser sheet

A friend also suggested using pogo pins as connectors. That sounds good, but it makes the internal circuitry more complex because I don't know yet how I would need to wire the WLEDs then.

Theoretically, you could also connect a microphone to the ESP32 and then operate the LEDs in a “sound reactive” mode, although it's usually quiet in my (work) room and only the keyboard can be heard. And during video calls, it's never that dark (at least not in spring/summer).

https://github.com/Aircoookie/WLED

https://cults3d.com/de/modell-3d/haus/light-panels-nanoleaf-replica-wall-panel https://cults3d.com/de/modell-3d/haus/lampara-triangular-simil-nanoleaf

• Edge length: 113 mm
• Cover film: 0.5 mm
• Minimum height: 6 mm
• Maximum height: 10 mm
• Rounding length (Edge): 20 mm
• Rounding length (Vertex): 14 mm
• Wall thickness: 2 mm
• Margin (Rear side): 3 mm (2 mm at connectors)

Link to the technical teardown: https://www.eevblog.com/forum/projects/nanoleaf-aurora-teardown/